Gymstick AIR BIKE PRO, Руководство пользователя

Страница: 11 / 26

11 AIR BIKE PRO
ASSEMBLY INSTRUCTIONS
STEP 4.
A) Install the Pivot Arms (#16 & #17) by threading the (preinstalled) pivot shaft into the
corresponding pivot-boss of the Base Frame Assembly (#1). Using a standard crescent wrench
(not included), thread each shaft into the pivot-boss using a clockwise rotation. Fully tighten each
shaft until it is flush against the pivot-boss of the Base Frame Assembly. (Reference Figure #3)
B) Once the Pivot Arms are mounted to the Base Frame Assembly, attach the ends of the
Connecting Arms (#15) using 1-Pivot Bolt (#30), 1-Flat Washer (#24) , and 1-Nylon Nut (#32) per
side. (Figure #4).
Assembly Step #4 completed.
Assembly hardware required:
#24 Flat Washer Qty. 2
#30 Pivot Bolt M8 Qty. 2
#32 Nylon Nut M8 Qty. 2