Gymrex GR-MG 58, Руководство пользователя

Страница: 26 / 117

b) Place the seat (16) on the assembled structure. Secure with M8 washers and
M8x25 screws.
c) Align the backrest mounting holes (15) with the main frame holes. Fasten the
backrest with M8 washers and M8x70 screws.
All connections of the machine should be fixed and pressed correctly. After
completing the assembly activities, it is allowed to start working with the machine.
Before each use, adjust the seat height according to your preferences. To adjust
the seat position, move it seat up or down.
3.3. Cleaning and maintenance
a) After each cleaning, all components should be well dried before the machine
is used again.
b) Store the machine in a dry and cool place protected from moisture and direct
sunlight.
c) Do not spray the machine with a stream of water and do not immerse it in
water.
d) Regularly inspect the machine for technical failure and damage.
e) Use a soft cloth for cleaning.
f) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the machine.
g) Do not clean the machine with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.
At the end of its service life, this product must not be disposed of with normal
household waste, but should be taken to a collection point for electric and
electronic machine recycling. This is shown by the symbol placed on the product,
operating manual or the packaging. Materials used in the machine can be reused