Placing and Adjusting
the equipment
After having prepared the foundation of the main pole it is time to prepare
the foundation of the instruments.
In order to better stabilize the equipment you will have to create separate
concrete bases for every instrument. The procedure takes place the
same day with the installation of the main pole.
The exact distances of the additional instrument holes can be seen from
the graphics in the following pages. Each hole needs to be approximately
30cm wide x 30 cm length x 30cm deep and should be filled with
concrete.
After the concrete has stabilized you need to drill and screw (if required)
the instrument on the bases you’ve created using the special expanding
screws supplied along with the equipment. Alternatively you can also use
aftermarket mechanical plugs.
Please note that drilling for stability purposes is required for some
and NOT ALL the instruments.
Concrete bases are used to ensure the stability of the instrument in
a gravel or soil surface.
Expanding screws supplied
with the equipment
Aftermarket mechanical plugs
