5
6
8
4
1
2
2
1
2
1
3
1
3
3
2
7
Thread a rod
(2)
through each hem along the full length
of the cover
(1)
.
Insert the rods
(2)
into each "pocket" at the ends
of the cover
(1).
Position the 28 self-gripping strips
(3)
around one rod
(2)
along the same side, through each
slot in the removable cover
(1)
.
NM272B - Page 2
Check that the cover
(1)
is properly centred on the body: lengthwise (same fabric fit at both ends) and equally balanced
on both sides.
The rods are slightly longer than the cover:
therefore you need to insert one end into a pocket (
step 6
),
then push the rod as far as it will go in the direction shown in step 6 in order to insert the other end into the
second pocket.
4cm
bending
