1
Contents
Features
1.0
Recommended Safety Precautions
................. 2
1.2 Plasma Cutting Risks ............................................... 2
2.0
Installation and Adjustment
............................ 4
2.1 Parameters............................................................... 4
2.2 Installation .............................................................. 4
5.0
Cutting Preparation
.......................................... 10
5.1 Cutting Operation................................................. 10
4.0
Function Introduction
......................................... 7
4.1 Cutting Mode Selection .......................................... 7
4.2 Cutting Parameters ................................................. 8
4.3 Two Different Kinds Of Cutting Torch ................... 9
4.4 Error Messages (E01-E13)........................................ 9
PLEASE NOTE that under no circumstances should your
PLASMAARC45 be altered or changed in any way from
standard factory configuration. Doing so, will void the
machine warranty.
PLASMA
ARC45
• Pilot arc controller. Cutting selection Modes:
Cut/Grid/Gouge
• Single phase input from 230V±10%
• 90mm inch LCD screen: Variety of parameters shown
simultaneously
• Phase loss protection, low voltage protection
• PFC technology (Power Factor Correction)
• Error code displays with user friendly solutions referenced
in the user manual
• Intelligent protection: TIP torch connection, Over-current
and Over-heat alarms
3.0
Machine Layout and Components
................... 5
3.1 Water Trap............................................................... 6
3.2 Consumable Kit ...................................................... 6
6.0
Maintenance
....................................................... 11
6.1 Cutting Torch Maintenance.................................. 11
7.0
Warranty Schedule
............................................ 13
8.0
Package contents & Optional Extras
............. 14
