GW Instek Two Line V-Network GLN-5040A, Руководство пользователя

Страница: 14 / 17

GLN-5040A User Manual
12
Set up
Procedure
1. Ground the GLN-5040A with the testing
receiver ground wire.
2. Connect the isolated transformer and the GLN-
5040A two line V-network.
3. Connect to the EUT; please place the equipment
with the reference to the above schematic
diagram.
4. Connect the GLN-5040A interference signal
output terminal to the EMI receiver input
terminal.
5. Select the correct filter for the testing standard.
6. Connect the GLN-5040A to the isolation
transformer, which is connected to the power
grid, and power on to test.
7.
Use the phase line switch on the GLN-5040A to
select different phase lines during the test.
Note

When using the equipment, don't open the case,
don't in a humid, explosive or inflammable
environment. Please ensure the equipment
surface is dry and clean before use.

The maximum voltage should be under 50V
when using the AC power supply.

Please read the user manual carefully before
use to become familiar with the safety the
requirements and to test correctly.

It is recommended to use an isolation
(ES) Equipements Scientifiques SA - Département Tests & Mesures - 127 rue de Buzenval BP 26 - 92380 Garches
Tél. 01 47 95 99 45 - Fax. 01 47 01 16 22 - e-mail: tem@es-france.com - Site Web: www.es-france.com