GW Instek GDM-8246, Руководство пользователя

Страница: 10 / 28

GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯
18
⎯
:CALCulation:SDMB:STATe?
Returns DBM mode on or off.
:CALCulation: SDMB:STATe <Boolean> Sets DBM mode on or off.
:CALCulation: SDMB:REFerence?
Returns the reference impedance
value of the DBM mode.
:CALCulation: SDMB:REFerence <NR1>
Sets the reference impedance
value of the DBM mode.
:CALCulation:HOLD?
Returns the hold and auto-hold
on or off.
:CALCulation:HOLD <NR1>
Sets the hold and auto-hold on or
off.
z
Status Commands
Table 3 lists the status commands that set and query the various
registers and queues that make up the status and event structure of
the Digital Multimeter.
Table 3: Status Commands
*CLS
Clears the status data structures.
*ESE <NR1>
Sets the Event Status Enable Register
(ESER).
*ESE?
Returns contents of Event Status Enable
Register (ESER).
*ESR?
Returns and clear the contents of
Standard Event Status Register (SESR).
GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯
19
⎯
*SRE <NR1> Sets contents of Service Request
Enable Register (SRER).
*SRE? Returns contents of Service
Request Enable Register (SRER).
*STB? Reads Status Byte Register
(SBR).
:STATus:OPERation:CONDition? Returns the contents of the
OPERation condition register. Returns
NR1.
:STATus:OPERation:ENABle
<NR1> Sets the contents of the enable mask
for the OPERation event register.
:STATus:OPERation:ENABle? Returns the contents of the enable
mask for the OPERation event
register. Returns NR1.
:STATus:OPERation:EVENt? Query the contents of the OPERation
Event register.
:STATus:PRESet
Presets the OPERation and
QUEStionable status registers.
:STATus:QUEStionable:CONDition? Returns the contents of the
OPERation condition register. Returns
NR1.
:STATus:QUEStionable:ENABle
<NR1> Sets the contents of the enable mask
for the QUEStionable enable register.
:STATus:QUEStionable:ENABle? Query the contents of the
Questionable Enable register.
:STATus:QUEStionable:EVENt? Query the contents of the
QUEStionable Event register.