9
Dip Switch setting
1. Day & Night Time Delay: 2sec. / 4sec.(Default 2sec.)
- The setting of the delay time from Day(Color) Mode to Night(B/W) Mode or
from Night Mode to Day Mode.
2. Flickerless Mode: ON / OFF(Default OFF)
- If the NTSC system camera is used with 50Hz fluorescent lighting, the
screen will flicker. In this case, set the flickering switch to “ON”.
3. BLC(Back Light Compensation): ON / OFF(Default ON)
- When the lighting source is behind of an object, the object may appear
dark. Set the BLC switch to “ON”, the object will become brighter.
4. AWB(Auto White Balance): ATW / AWC(default AWC)
- ATW(Auto Tracking White Balance): It controls the screen color
automatically in the limited changing range of the external light. (Color
Temp. 2,500 ~ 9,500K˚)
- AWC(Auto White Balance Control): It controls the screen color
automatically in a wide changing range of the external lighting source. But
in some environment (Mono-colored or non-whitened) the color control may
not be available. (Color Temp. 2,000 ~ 18,000 K˚)
Dip Witch Setting
NO.
Function
ON
OFF
1
Time Delay
2~3 sec.
4~5 sec.
2
Flickerless
OFF
ON
3
BLC
ON
OFF
4
ATW/AWC
ATW
AWC
1
2
3
4
ON
SERVICE PORT
DIP SWITCH
DC LEVEL VOLUME
10
Troubleshooting
If you have trouble operating the camera, check the following guides for
the possible cause of the problem.
• Nothing appears on the screen.
-> Check the power and video signal line connection.
-> Check the brightness level of DC Auto Iris Lens.
• The video image is not clear.
-> Check if the dome cover has lots of dust on the surface.
Clean the cover with a clean cloth or brush.
-> Make sure that the screen is not exposed directly to a bright light.
Adjust the position of the camera if necessary.
• The screen is dark.
-> Adjust the contrast feature of the monitor.
-> Check the brightness level of DC Auto Iris Lens.
• The screen does not properly display when IR LEDs Work.
-> Check if an object is located within 50cm from the Camera.
Move the object away from the camera 50cm +
-> Check if the dome cover has dust.
Clean the cover with a clean cloth or brush.
If you can’t solve the problems with the above guidelines, please contact an
authorized technician.
