Operating Instructions
GV-VD550IR
1/3” Day/Night, Varifocal, Weather Resistant,
Vandal IR Dome Camera
Before installing and using the camera, please read the instructions
thoroughly and retain them for reference.
2
This symbol is intended to
alert the user to the presence
of non insulated “dangerous
voltage” within the product’s
enclosure that may be of
sufficient
magnitude
to
constitute a risk of electric
shock to persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
product.
Warning
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
Wiring methods shall be in accordance
with
the
National
Electric
Code,
ANSI/NFPA 70.
Regulatory Notices For U.S.A
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable
protection
against
harmful
interference in a residential installation! This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
••••
Reorient or relocate the receiving
antenna.
••••
Increase the separation between the
equipment and receiver.
••••
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
••••
Consult the dealer or an experienced
radio/TV technician for help.
This Class A digital apparatus meets all
requirements of the Canadian Interference -
Causing Equipment Regulations.
This product is manufactured to comply with the radio interference requirements of
EMC Directive 89/336/EEC and 93/68/EEC.
