GVD M1142, Быстрый старт

Страница: 50 / 60

Mobile NVR M1142 Quick Start Guide 44
Configure Network Parameters
If you have set up the NVR system by the Installation Wizard as described in Use Installation Wizard , you
can skip this section. Otherwise follow the guide below to set up the networking parameters:
Note Before conducting the network configuration, make sure the network environment is ready. If the
network is not available, contact your network administrator for further help.
1. On Windows®, click the Start button
| Control Panel | Network and
Sharing Center | Change adapter
settings
.
2. Right-click over the active connection
to use and click Properties from the
context menu that opens.
3. Click Internet Protocol Version 4
(TCP/IPv4)
. Then click the
Properties
button.
4. On the General tabbed page, configure
the IP address and the subnet mask. Then
press the
OK button.