3
-
Check whether the mains voltage supply that you intend to use is the same as that
of the kettle. For information on the voltage supply of the kettle, please see the
rating plate located on the base station.
-
Switch on the kettle using the switch on the machine. The control lamp lights up.
-
Switch the kettle on using the switch at the bottom of the handle and the indicator
light will turns on.
-
The kettle switches off automatically when the water has boiled. Now disconnect
the kettle from the mains power supply. Always hold the lid closed when pouring
the water out. Beware of scalding!
-
Flat, level surface: When using the kettle, place it on a stable, secure, dry and
level surface, out of children’s reach, to prevent damage or injury from the kettle
overturning. Do not use the kettle on an inclined plane.
Important Instructions for using this Kettle
-
Use only cold water when filling.
-
The water level must be between the MAX. and MIN. marks! If the water level
exceeds the max. level, boiling water and steam may be ejected, which may be
hazardous to the user.
-
Switch the kettle off before removing it from the base.
-
The kettle is only to be used with the stand provided.
-
Do not immerse in water.
-
The appliance can only be used for household only.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
-
Always ensure that the lid is tightly closed.
-
The base and exterior of the kettle must not become wet.
-
Caution: The kettle should be used with a residual current device (safety switch) to
lesson the risk of scalding or other injury from hot water that my be ejected if the
heating element ruptures.
Electrical Safety Instructions
