GVA GVAEM925EGG, Инструкция по эксплуатации

Страница: 11 / 20

Operation Instructions
2. In standby mode, instant cooking at 100% power level for 30 seconds cooking time can
be started by pressing ‘START/+30SEC’. Each press of the same button will increase
cooking time by 30 seconds. The maximum cooking time is 99 minutes and 99
seconds.
Note: during microwave cooking and defrost time, more time can be added by pressing the
‘START/30SEC’ button.
Weight Defrost Function
1. Press ‘WEIGHT DEFROST’, LED screen will display ‘dEF1’.
2. Press number keys to input weight of food to be defrosted. Input the weight between
the range 100~2000g.
3. If the weight input is not within 100~2000g, the input will be invalid.
4. Press ‘START/+30SEC’ to start defrosting, the cooking time will be displayed.
Time Defrost Function
1. Press ‘TIME DEFROST’, LED screen will display ‘dEF2’.
2. Press number keys to input defrosting time. The effective time range is 00:01~99:99
3. The default microwave power is power level 3. If you want to change the power level,
press ‘POWER’ once, and the LED will display ‘PL 3’, then press the number key of the
power level you want.
4. Press ‘START/+30SEC’ to start defrosting. The cooking time will be displayed.
Memory Function
1. Press ‘0/MEMORY’ to choose memory 1-3 procedure. The LED will display 1,2,3.
2. If the procedure has been set, press ‘START/ +30 SEC." to use it. If not, continue to
set the procedure. Only one or two stages can be set.
3. After finishing the setting, press ‘START/ +30 SEC’ once to save the procedure and
turn back to the waiting states. If you press ‘START/ +30 SEC’ again, it will start
cooking.
Example: to set the following procedure as the second memory option, that is memory procedure
2. To cook the food with 80% microwave power for 3minutes and 20 seconds. The steps are as
follows:
a. In standby mode, press ‘0/MEMORY’ twice, stop pressing until the screen displays ‘2’.
b. Press ‘TIME COOK’ once, then press ‘3’,’2’,’0’ in order
c. Press ‘POWER’ once, ’PL10’ will display, then press ‘8’ and ‘PL8’ will display.
d. Press ‘START/+30 SEC’ to save the setting. The buzzer will sound once then and then go
back to standby mode. If you press ‘START/+30SEC’ again, the procedure will be saved
as memory 2 and operated.
e. If the electricity is cut off, the procedure will need to be reset.
f. If you want to run the saved procedure, in standby mode, press ‘0/MEMORY’ twice, the
screen will display ‘2’, then press ‘START/+30SEC’ to start.
10