GVA GVADF40, Инструкция по эксплуатации

Страница: 6 / 8

Fan Control Switch
The control switch positions are:
• 0 = OFF
• 1 = Low Speed
• 2 = Medium Speed
• 3 = High Speed
Check that the Fan control switch is set to the off position before plugging into the mains supply.
Place the Fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making sure the speed control is at OFF position.
To operate the fan turn speed control dial clockwise until desired wind speed is achieved.
Adjust tilt by turning neck piece assembly (8) and tilting body to the desired wind direction (i.e. either upward or
downward).
To activate the oscillation function, push down the oscillation pin (7) on the top of the motor. The fan will then oscil-
late until the pin is pulled back up.
Operation Instructions
5