GVA GVABF42, Инструкция по эксплуатации

Страница: 7 / 12

6
Reversing the Door Swing
The side at which the door opens can be changed from the left hand side (as supplied) to
the right side, if the installation site requires. Should you require reversing the opening
direction of the door, please follow these instructions.
Warning:
When changing the side at which the door opens, the appliance must not be
connected to the mains. Remove by grasping the plug from the main - do not pull on
the cord.
1. Remove the upper hinge cover (6)
2. Remove the two screws (1) that hold the upper hinge (5) (right side) to the frame. Take
away the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching.
4. Remove the two screws (8) that hold the lower hinge (2). Remove the lower hinge (2). If
there is originally a washer on the hinge pin, it must remain there when reversing.
5. Where appropriate or necessary, remove the front levelling legs (4) for convenient
reversing the lower hinge and remember to install them after reversing.
6. Remove the plug buttons (7) for holes to the right side.
7. Set the door in its place making sure it sits on the door seat at the lower hinge (2).
8. While holding the door in the closed position secure the upper hinge (5) on the top left
hand side with the two screws (1). Do not tighten the two screws (1) until the the door is
well aligned with the cabinet. Adjust the lower hinge (2) as well if necessary for aligning
the door.
9. Install the upper hinge cover (7) on the upper hinge.