GVA GVA4KG, Инструкция по эксплуатации

Страница: 14 / 16

13
Maintenance
Cleaning the lint filter
Please unplug the power cord prior for any cleaning. The lint filter must be in place whenever
drying. It must be cleaned before each use.
1. Removing the filters
Remove by pulling outwards with fingers, inserted into
the four holes around the exhaust vent shroud. The filter
is in 3 parts: Exhaust vent shroud, lint filter and exhaust
filter .
1. Cleaning the filter
Separate “exhaust vent shroud”, “lint filter” and “exhaust filter”.
Clean the lint on the lint filter and exhaust filter with a soft
brush or vacuum cleaner. Do not damage the filters.
1. Re-installing the filter
After cleaning, assemble in the sequence of “exhaust filter-lint filter-exhaust vent
shroud”, align the recesses in the centre with the projection in the centre of the drum.
Make sure that it is firmly inserted.
NOTE: The filter fixed on the rear of the drum should also be
cleaned with a soft brush.
Cleaning of the air intake filter
- The filter should be cleaned once a month.
- Remove by pulling outwards holding the upper and lower ends of the air intake shroud.
- Remove the filter inside the shroud and clean it with a soft brush
- Reassemble and install as before.
- Slightly push upwards with your thumb until the latch hook
disconnects, then remove.
Cleaning the interior and exterior of the dryer
- Do not wash directly with water.
- Do not use thinner gasoline or alcohol.
- Do not use any type of spray cleaner when cleaning the interior.
If dryer drum becomes stained, clean the drum with a damp
cloth.
- Remove ay residue before drying the next load.
- Clean cabinet with mild soap and water. Do not use harsh or
abrasive cleaners, this could damage the dryer.
Maintenance