7
Operating Instructions
Rotating grille
The rotating grille at the front of the box fan maximises the
cooling efficiency and moves air around the room. Press the
louvre rotation switch on the front panel to the MOVE position
for the grille to start rotating.
When you want the airflow in one direction only, wait until
the fan is blowing in the desired direction before stopping
the grille movement.
Three-speed operation
The box fan is designed to work in three different speed modes, ranging from a gentle breeze
(1) to full speed (3).
To start/stop the fan and select a rotating speed, you can turn the speed control (pictured right)
clockwise or counterclockwise:
• Speed 0 - Stop/Off
• Speed 1 - Low Speed
• Speed 2 - Medium Speed
• Speed 3 - High Speed
NOTE: When the timer is set to “OFF”, the fan will not operate.
To use the fan without the timer, you must turn the timer
knob to “ON” before adjusting the rotating speed
Timer
The fan has a timer you can use to set the amount of time (up to 120 minutes) after which the
fan switches off automatically. To operate the timer, turn the timer knob clockwise to the desired
position.
After the set time, when the timer reaches the “OFF” position, the
fan switches off. To operate the fan again at this stage, reset the
timer to the desired length of time you want it to run for, or use the
fan without the timer (see the note below).
NOTE:
To use the fan without the timer, turn the timer knob to
“ON”, then turn the speed control to select the desired fan
speed and finally select MOVE or STOP for the rotating
grille.
