6
INSTRUCTIONS TO USAGE:
1. Put the machine on a flat surface.
2. Fill the water into the water tank, and then tighten the tank cover.
3. Put the water tank on the main body.
4. Check if the rated voltage meets the input voltage, and plug in the
socket.
5. Switch on the machine; the background light of LED will be on. The
machine begins to work.
6. Press the button “volume”, you may adjust the mist volume. Press the
button “Ion”, the ion generator works. On the LED display, it shows the
shape of trees. Press again to stop the function.
7. Constant humidity: Before you press the button “HUMIDITY”, LED
display shows the current humidity. You may set the humidity arranged
from 45%RH to 75%RH. Press once, it will increase by 5%RH. When it
reaches 75%RH, press again, it will back to 45%RH. After you set the
expected humidity, the machine will keep the memory after 5 seconds.
5 seconds later, LED display shows the current humidity. If the expected
humidity is less than the current humidity, the machine will be in sleeping
state. But if the expected humidity is higher than the current humidity, the
humidify function will work.
8. Timer setting: There are 12 timer setting: 1,2,3,4,5,6,7,8,9,10,11,12
hours. Press the button “TIMER”, LED display shows the shape of clock.
The timer shows the rest operation time and decrease by 1 hours, i.e., if
set the timer at 12 hours, LED display shows 11 after one hour.
9. Once the water in the basin is too little to keep the machine working, the
machine will automatically stop working. LED shows the shape of lack of
water. Refill the water, and the machine will restart.
*Operation Instructions:
• First Operation, put unit in the room temperature for half of an hour before
running.
• It is recommended to use the unit under temperature of 20 degree C,
relative humidity less than 80%RH.
• Use clear water not over 40 degree C
• Check the water basin, make sure it is clear.
• Connect the power plug and switch on the unit (NEVER RUN THE UNIT
WHEN THERE IS NO WATER IN WATER BASIN), the main connection
lamp will be on. The unit starts working.