Guzzanti GZ-200, Инструкция по эксплуатации, Страница: 30 / 32

3
16. Children should be supervised to ensure that they do not play
with the appliance.
17. Save these instructions.
OPERATION
It is recommended that operate the kettle several times following
the below instruction and discard off the water before first use. This
will remove the material or dust remained in the appliance which is
caused by the manufacturing process.
1. Open the lid by pulling the Lid upwards and fill water into the
kettle. Then replace the lid otherwise the kettle could not be cut
off power automatically after water being boiled. Alternatively
the water can be filled through the spout.
Caution: the filled water level must be between the Max and
Min level as indicated on the housing. Too less water will do
damage to the heat element and if the water is overfilled, boiling
water may be ejected.
2. Replace the kettle on the Power Base and connect to power
supply. Position the kettle so that the spout of kettle is facing
away from you.
3. Press down the switch to “1” position and the lamp will be
illuminated. And water begins to be heated up. Do not remove
the lid while the water is boiling.
4. Power will be cut off automatically and switch will be back to “0”
position once water has been boiled. And the lamp will be off.
5. The boiling process can be terminated at any time by lifting the
kettle off the Power Base.