Guzzanti gz-14, Инструкция по установке и эксплуатации

Страница: 30 / 36

30
• Your old appliances contain insulation gases and refrigerant that
must be disposed of correctly. Please ensure that the refrigerant
circuit is not damaged before the appliance is taken away for correct
disposal in line with current legislation. If there is any doubt contact
your Local Authority for instructions.
• This appliance may contain the refrigerant isobutene (R600a). This
is a natural gas with a high level of environmental compatibility;
however, caution is required as isobutene is a flammable gas. It is
essential to ensure that refrigerant tubes are not damaged during
transportation and the installation of the appliance. In the event that
the refrigerant circuit is damaged, avoid naked flames or sources of
ignition and ventilate the room in which the appliance is situated.
• Do not damage the refrigerant circuit.
• Do not allow children to play with the appliance. Children must never
play in or around the appliance.
• If using an adaptor, this must be used in accordance with the
manufacturers instructions and ensure that the electrical circuit is not
overloaded as this could cause overheating.
• Do not twist or bend the cables, and keep them away from hot
surfaces.
• Do not plug ın or unplug this appliance with wet hands.
• Following installation make sure that the power cable is not trapped
underneath the appliance.
Section 3. Operating the Appliance
3.1. Switching on the Appliance
• Allow the appliance to stand for a minimum of 4 hours after
installation.
• Plug in the appliance and switch on at the mains supply.
• Set the thermostat control to the required setting as detailed in the
Temperature Control section (3.2.).
• Leave the appliance for approximately 4 hours for the correct
temperature to be reached.