14
Setting timer
1. Press TIMER button to set the operating hours you desired (1 to 24
hours, the timer indicator will light on). When the set time has been
reached, the machine will turn off automatically. The display window
will show the hour(s) you set as you press TIMER button. If the timer
button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you
can PRE-SET the time for the machine to work. For example, if you
press the timer to '2', the unit will work automatically after 2 hours.
Sleep function
1. In cooling mode, by pressing the SLEEP button, the set temperature
will increase 1 °C (2 °F) at the 1st hour, another 1 °C (2 °F) at the
second hour, then keeps at that temperature.
2. In sleep mode, the ventilation will keep at low speed. Re-press the
SLEEP button, the setting temperature and ventilation speed will
return to the pre-selected one.
3. The unit will shut down automatically after the SLEEP function
running for 12 hours.
4. Please note, the sleep function is not available while the machine is
working in AUTO, FAN (ventilation) or DEHUMIDIFICATION mode.
5. When the machine is in Sleep function, the Fan Speed would turn to
be LOW speed.
dehumidify (dRY) mode
In dehumidify (DRY) mode, the temperature cannot be adjusted,
the ventilation will fix at low speed. When the unit is operating in
Dehumidify ( DRY) mode, humidity extracted from the air is collected in
an internal tank. If the tank reaches full, the compressor and motor cut
out automatically. At the same time, the “Water Full” indicator comes on.
An alarm will also sound. When the tank is full, drain the water as shown
in the page concerning “DRAINAGE”. You may also use the unit without
having to empty the tank so often by using “continuous drainage”, please
also refer to the page about “DRAINAGE”.
