2.2 Rating plate
The rating plate with the connection and performance data can be founded beneath the device.
3 Operation and Handing
This chapter provides you with important notices with regard to operating the device. Observe the
following notices to avoid dangers and damages:
WARNING
► Do not leave the device unsupervised when it is in operation, so that you can intervene quickly in
the event of dangers.
3.1 Operation
With the milk frother you can heat cold as well as warm milk froth.
The appliance has got three markings for the filling:
MIN
: Fill milk at least up to that marking
MAX FROTH
: Fill milk up to that maximum marking to make milk froth.
MAX MILK
: When you want to heat milk but not froth it, you can fill milk up to that maximum marking.
PLEASE NOTE
► Please note the maximum froth markings. Please use for milk froth only the MAX FROTH marking.
Otherwise so much foam will be made that the lid would lift and milk would overflow.
You can make warm as well as cold milk froth.
Hot milk froth
Please put the whisk for frothing into the lid holder.
Press “HOT FROTH” button, The button lights red. This is the setting for the hot milk froth. The
appliance starts to make milk foam and stops automatically as soon as the foam is finished.
Heating milk
Please put the whisk for frothing into the lid holder.
Press “HEAT MILK” button ,The button lights red. The whisk rotates with reduced speed in order to
ensure even heat distribution and prevent the milk from burning.
Cold milk froth
Please put the whisk for frothing into the lid holder.
Press “COLD FROTH” button ,The button lights blue. Now cold milk froth is made.