Gutta 4296203 - 4296215, Руководство по сборке

Страница: 3 / 20

3
Requirements | Assembly instructions | Care information
• Observe the local building regulations and the snow load zones in your region.
• Before the assembly sort the parts and check the contents list according to the assembly instructions.
• At least 2 persons are required to assemble the carport kit.
• Follow the instructions and installation steps in the assembly instructions.
• The Twin-Wall Sheets do not walk on transverse running boards (at least 2 rafters).
• Point loads must be avoided absolutely
• Regularly remove snow from the roof
• Snow load 100 kg/m²It makes sense to install a snow guard above the carport.
• Keep the gutter free of leaves, dirt and snow.
• The carport kit must be installed on a flat, solid surface (for example concrete, concrete slabs).
Foundation dimensions: length 40cm x width 40cm x depth 80cm
• Clean the Twin-Wall Sheets with water and a mild detergent and do not use abrasives, acetone or solvents!
• Defective or bent posts or beams must be replaced immediately.
Colour and size deviations etc. within the usual tolerances reserved. Our recommendations do not release the custo-
mer from the obligation to check the product on his own responsibility. In case of doubt, please consult a specialist.
Technical modifications reserved
13, 17, 19
4 und 5
17
TX 25
GB
3