mega macs PC
Putting the mega macs PC into Operation
10. Insert the Bluetooth® adapter into the USB port of the PC.
Once the PC recognized the Bluetooth® adapter the LED becomes blue.
The main menu appears.
Now you can work with the mega macs PC software.
7.3
License Release
NOTE
In order to use the full scope of the purchased licenses you need to connect the mega macs PC
software to the HGS server prior to the first start-up.
Proceed as follows to connect the mega macs PC software with the HGS server:
1. Select
Contracts
under
> Settings
in the main menu.
2. Select
>License<
.
3. Call up
My licenses
with
.
Data download is in progress. Purchased licenses are displayed.
4. Start the mega macs PC software again.
Now you can work with the mega macs PC software.
7.4
Closing the mega macs PC Software
Proceed as follows to close the mega macs PC software:
1. Close the mega macs PC software with
.
2. Observe the confirmation prompt.
3. Close the mega macs PC software with
. Abort the procedure with
.
The mega macs PC software will be closed.
23