GUTMANN EM05 S, Инструкция по эксплуатации

Страница: 33 / 60

Operation via Switch (Located on the
Ceiling Device below the Pane)
LED Indicators
(Located on the Ceiling Device)
Information regarding the operating
conditions of the hood can be read on the
device’s LED indicators:
Indicators
en
Push one switch at the left side towards
symbol of fan: fan ON
Push longer than two seconds switch at the
left: after-run active
Push twice longer than two seconds switch
at the left: fan OFF
The clean grease filter alert is operated by
this switch too. Push long until the red LED
is off.
Push left switch towards symbol of light:
light ON/OFF
Longer push results in dimmed light (not with
LED).
Push switch at the right side t
symbol: higher fan
performance
Push right switch towards – symbol:
lower fan performance
In certain cases switch allocation can differ
from the photo due to specific customer
requirements.
LED 1: Indicates operational status ON/OFF
LED 1 blinking: Indicates automatic cool down
period (the hood will automatically decrease
by one power level every 5 minutes until it
finally turns off)
LED 2: Power level 1 (lowest motor speed),
press button 2 on the remote control once
LED 3: Power level 2 (middle motor speed)
Press button 2 on the remote control twice
LED 4: Power level 3 (high motor speed)
Press button 2 on the remote control three
times
LED 5: Intensive level (motor automatically
returns to level 3 after 3 minutes)
Press button 3 on the remote control
LED 6: Filter Saturation Indicator
The metal filter must be cleaned when the
red LED lights up (see section on cleaning
and care).
Button min. 10 sec. pressures
to a red LED goes off !