GUTMANN 11C600I, Инструкция по эксплуатации

Страница: 39 / 48

39
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster and Super Booster function
Booster [ P ] and Super Booster [ ] grant a boost of Power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high Power.
This is foreseen for example to heat up rapidly big quantities of water, like noodles.

Start up / Stop the Booster:
Action Control panel Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Stop the Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]

Start up / Stop Super Power
Action Control panel Display
Start up the Booster
Slide to the end of the “SLIDER”
[ P ]
Or press directly on the end of
the “SLIDER”
Start up Super Booster Re-press key [ P ] [ and P ]
Stop the Super Booster
Slide on the “SLIDER“
[ P ] to [ 0 ]
Stop Booster
Slide on the “SLIDER“
[ 9 ] to [ 0 ]

Power management:
The hole cooking hob is equipped with a maximum of Power. When the Booster function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed :
Heating zone selected The other heating zone: (example: Booster level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone