GUSMER GX-8, Руководство по эксплуатации, Страница: 8 / 32

Model GX-8 Spray Gun
8 32943-1, Issue 1
VALVING ROD
ASSEMBLY
PATTERN
CONTROL
DISC (PCD)
MIXING
MODULE
Figure 1. Mixing Module
The GX-8 has been designed for low output spraying performance, durability, reliability,
and serviceability. In order to enable the gun to dispense extremely low levels of
chemical, the Mixing Module has precision-machined chemical ports incorporated into it.
To protect these ports from clogging extremely fine screen mesh filters are used. Special
material coatings and material finishing techniques were also incorporated into the design.
A thorough understanding of this manual is essential to completely insure that this gun
provides the best service possible. In addition, the experience gained through daily use of
the gun will sharpen your operational and service skills. Functional problems can be
significantly reduced by following the techniques and service recommendations described
in this manual.
Gusmer and our Authorized Distributors have experienced, highly qualified, technical
representatives who are always available to help if a problem does occur. In most cases, a
simple telephone call to our technical representatives will provide you with a solution to
your problem. Be sure to take advantage of their experience and expertise.
IMPORTANT: Substitution of parts not designed manufactured, or recommended by
Gusmer could result in harm to the user and/or damage to the GX-8 Gun. Any
alterations to or substitutions for Gusmer parts will void the warranty provisions set
forth elsewhere in this manual