Gurin BPM265W, Инструкция по эксплуатации

Страница: 5 / 8

MEM
PUL
/min
DIA
SYS
SET MEM
BPM265W
START/STOP
17
Use the Memory Function
Press the memory button to enter the memory reading mode.
then press the memory button for 6~10 seconds.
To clean out the memory values To clean out the memory values
The 90th latest
measurement value
The 2nd latest
measurement value
The 1st latest
measurement value
Forward
Backward
In the memory reading mode, press the memory button to view
the latest value to the earliest value. Press the setting button to
view the earliest value to the latest value.
To read the memory values
16
Use the Memory Function
Alternating
display
Turn to next
The 1st latest
measurement value
The Average
measurement value
Press the memory button to enter the memory reading mode. The
average value will display on the screen with the average reading.
To read the average value
The unit stores the blood pressure and pulse rate in the memory
after completing a measurement every time. It can automatically
store 180 sets measurement values for 2 users (2*90). The earliest
record is deleted to save the latest measurement value when any
one user more than 90 sets.
The unit also calculates an average reading based on the values of
the latest 3 times measurement taken.
The symbol "M" and the relative times will appear at the same time
after you press the memory button.
How to Use the Memory Function
15
Take a Measurement
Please rest for at least 30 seconds
before taking the next measurement.
The unit will automatically turn off after
two minutes if you have forgotten to
turn off it.
Press the START/STOP button to turn off the unit.
4
"IHB" display
OR
"mmHg" display
OR
"kPa" display
The cuff is deflated automatically,
and the measurement results are
stored in the memory with date
and time.
The symbol will be displayed
if arrhythmia is detected.
The blood pressure and pulse rate are displayed when the
measurement completed.
3
14
Take a Measurement
To a fit pressure Continue Inflating Heartbeat appear Inflating Start to inflate
The heartbeat symbol flashes once a pulse is detected.
Measurement starts while inflating.
2
Start to inflate Deflating automatically All symbols display
All display symbols appear on the screen. The cuff starts to inflate automatically.
Press the START/STOP button.
1
How to Take a Measurement
PUL
/min
DIA
SYS
SET MEM
BPM265W
START/STOP
PUL
/min
DIA
SYS
SET MEM
BPM265W
START/STOP
PUL
/min
DIA
SYS
SET MEM
BPM265W
START/STOP
PUL
/min
DIA
SYS
SET MEM
BPM265W
START/STOP
MEM
SET
MEM
MEM