1.
2.Press “ ” to confirm
deleting, the LCD displays
“ dEL dOnE” and the monitor
will turn off.
If you did not get the correct measurement, you can delete all
results by following steps below . (Take User 1 for example.)
Delete the Records
3.If there is no record, the
right display will show.
In the memory mode, hold
pressing “ ” button for
3 seconds, the flash display
“User ID+ dEL All” will show.
The most recent record (1) is shown first. Each new measurement
is assigned to the first (1) record. All other records are pushed back
one digit (e.g., 2 becomes 3, and so on), and the last record (60) is
dropped from the list.
CAUTION
3
. If you want to check the other user’s measurement records,
please press “ ” button to turn off the blood pressure
monitor. Then press and hold “ ” button to enter the selecting user
mode, press “ ” again to change the user, when the desired user ID
blinks, press “ ” button to confirm. Then press “ ” button to check
the records of the selected user.
Note: To exit out of delete
mode without deleting any
records, press
button before pressing “ ” to
confirm any delete commands.
17
16
DATA MANAGEMENT
DATA MANAGEMENT