8
Mounting information:
Remove packaging film. Fix platform board (2) with screws (6), nuts (9)
and washers (11) on platform consoles (1).
Fix platform console (1) and connection braces (4) at the hang-in braces
(3) by using screws (8), nuts (10) and washers (12). Fix diagonal braces
(5) at platform consoles (1) and hang-in braces (3), therefore use screws
(7), nuts (9) and washers (11). Check screws (tightened) before use.
Max. platform height 1.00 m. Max. load 150 kg.
Use:
Hang in the platform between the 2 ladder parts (see picture 2), the max.
platform height is 1.00 m. When using the platform, all 4 hooks must be
stuck on the rungs of the ladders. Lock the 4 saftey bolts as shown in
picture 1. We recommend to use a step stool to get onto the platform,
make sure that the step stool cannot slip away or fall over. Do not use a
chair to get onto the platform - danger of falling down! The platform can
only be used when both ladder parts are equiped with a stabilizer bar
(item n° 30307), 1 stabilizer bar is included in the ladder‘s standard
scope of delivery.
Observe the current regulations to prevent accidents. The entire
construction must be placed on plain and stable ground. Avoid all
activities which could make the construction fall over, such as leaning out
or hard work with tools.
When using the construction on stairs we recommend to take our rail
extension to ensure a stable position.
