Guntermann & Drunck DVIMUX4-PS/2, Инструкция по установке и эксплуатации, Страница: 5 / 40

The »DVIMUX4-PS/2« KVM switch
G&D DVIMUX4-PS/2 · 2
The »DVIMUX4-PS/2« KVM switch
The
DVIMUX4-PS/2
KVM switch enables you to operate up to four computers via
one console.
The console is provided with a PS/2 keyboard, a PS/2 mouse and a digital and/or
analog monitor. The computers connected to the KVM switch are operated from
the installed console.
The switching between computers takes place either via the pushbuttons on the
front panel, configurable key combinations, or a serial device which is connected to
the
Service
port.
The front panel of the device provides two USB interfaces to connect a USB key-
board and/or a USB mouse to the console.
Package Contents
 1 × DVIMUX4-PS/2 KVM switch (basic or multi-channel variant)
 1 × DVI-Divider adapter per supported video channel
 1 × data cable ( Update-Cable-2 )
 1 × power cable
 1 × »Installation and Operation« manual
A corresponding KVM cable is required in order to connect the computers to the
KVM switch. The appropriate KVM cable sets available are listed on page 31.
NOTE: The KVM switch emulates a full keyboard and mouse on each channel and
therefore guarantees error-free booting and a secure operation at all time.
NOTE: The devices of the
DVIMUX4
series are optionally available as desktop or
as rackmount variant (see
Order numbers
on page 31).
Rackmount variants should be installed to the rack with the front panel facing for-
wards.