Central Module » Expanding the KVM matrix system by cascading
G&D DVICenter DP64 ·
20
Defining the cascade mode of the central module
The central modules detect independently whether they are installed as master or as
slave device within the KVM matrix system.
How to change the cascade mode of a central module:
1. Press
Ctrl
(default) to open the on-screen display.
2. Press
F11
to call the
Configuration
menu.
3. Select the
System
entry and press
Enter
.
4. Select the
Cascade mode
entry and press
F8
to choose one of the listed options:
5. Press
F2
to save your settings.
NOTE:
Changing the cabling of the devices by accident can also change the operat-
ing mode of the central module.
To avoid accidental changes, you can adjust the operating mode of
each
central
module separately in the on-screen display of the respective device.
Auto:
The central module defines if it works in the master or slave mode.
Master:
In this operating mode, you can only connect user modules to
Dynamic Ports
that are configured for the connection of target mod-
ules.
You can change the names of the connected target modules. The
changed names are automatically updated on the slave devices of the
cascade.
Slave:
In this operating mode, you cannot change the names of connected
target modules. The names of the target modules are automatically
obtained from the master device.
Содержание DVICenter DP64
Страница 61: ...NOTIZEN...
Страница 121: ...NOTES...
Страница 122: ...NOTES...
Страница 123: ...NOTES...
