Initial configuration of network settings
G&D ControlCenter-Digital-288 ·
17
English
Initial configuration of network settings
Accessing the
Config Panel
web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.
Configuring network ports
A matrix switch, which is integrated into the network, can only be addressed after
the network ports are configured.
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
Enter
to log in and open the on-screen display.
3. Press
F11
to call the
Configuration
menu.
4. Select
Network
and press
Enter
.
5. Select
Interfaces
and press
Enter
.
6. Enter the following data under
Interface A
(interface
Network A
) or
Interface B
(inter-
face
Network B
):
IMPORTANT:
In the default settings, the
Network A
port is assigned to the IP address
192.168.0.1
.
Username:
Enter the preset username
Admin.
Password:
Enter the preset password
4658
.
Operational
mode:
Press
F8
to select the operating mode of the interface
Network A
or
Network B
:
Off:
switches off network interface.
Static:
uses static settings.
DHCP:
obtains the settings from a DHCP server.
IP address:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Содержание ControlCenter-Digital-288
Страница 33: ...Deutsch...
Страница 65: ...English...
Страница 66: ......
Страница 67: ...English...