Gunter & Hauer EOM 867, Руководство пользователя

Страница: 10 / 16

9
Spectification
5> We suggest that you run the oven elements for 15 minutes at 200 degrees to burn off any residuce
from their surfaces.
Full automatic programming
- :
2> When setting each of the time function, if there is no ne operation for 5
m inutes then it will return to
manual mode.
1> When setting the date of each function, long press on " + " or " - " for more than 3 seconds, the
date will progressively and rapidly increase or decrease.
6HFRQGNHHSSUHVVLQJRQEXWWRQXQWLO\RXVHH(QGRQWKHWLPH r screen. When you see " End "
on the time screen, Use " + " " - " button to adiust finshing time, Press " " button to confirm, the day's
time will appear on the csreen and the symbol " A " will begin to continuously light on the screen. The
symbol " " disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the
cooking period to the day's time.
The oven will start operating at the time calculated by deducting the cooking period from the set finishing
time, and will stop at the set finishing time. The timer will give an audible warning and the symbol " A "
will begin to flash. After bringing the cooking function and oven temperature knob to " 0 " position.
Pressing and button less than 3 seconds, it will stop the audible warning.
Pressing " " for more than 3 seconds set the oven to Manual mode again to use the oven.
Please note: Once setting full-automatic mode, all the time can not be changed, Change time means
cancle automatice progamme and enter into corresponding mode. If you need to reset automatic mode,
need to stop setting the current mode, to set the automatice mode according to the above steps again.
This function is used to cook after a certain period of time, with a certain duration. The food to be cooked
is put into the oven. The oven is adjusted to the desired cooking function. The oven temperature is
adjusted to the desired degree depending on the food to be cooked.
First: Press "
" button until you see " Dur " on the timer screen. Use " + " " - " button to adjust cooking
period for the food you wish to cook. Press " " button to confirm, the day's time will appear on the
screen and the symbols " A " will begin to continuously light on the screen.
3> When settiing each of the time function, pressing on " " for more than 3 seconds can cancel
current setting and enter manual mode.
4> During time function setting, pressing on " + " and " " for more than 3 seconds, a beep sounds it
can cancle the curent time function setting and enter standby mode.