8
INSTALLATIONS
Tub Wall
Under Seat Compartment
1
2
Cap Head
Aluminum Clamp
Motor
Jet Cover & Impeller
1
Turn the Cap Head counter-clockwise to remove, carefully pull the metal clamp and the jet motor backward
There may be water sealant between the Motor and Tub wall
2
Carefully detach the Jet Cover and Impeller from Tub Wall
To assemble the jet unit, install in the reverse steps above. You may have to apply some water sealant
between the Motor and The Tub wall
Cleanjet Max Assembly
Plate located inside the bowl
(Cleanjet Max only)
To remove the jet unit follow the steps below
Jet Handle (Cleanjet Max SL only)
Jet motor components are located behind the tub/bowl wall
Disconnect the foot-spa unit from any electrical source before
Disassemble the jet unit. All surface must be dry. Some jet
Components may contain sharp object and very hot after usage.
Warning
!!
