Gulf Coast Fans Futura HC-1992-DA Скачать руководство пользователя страница 3

C.1.Take the hanging bracket and secure it to the outlet box (marked Acceptable For Fan Support) using 

the mounting screws provided with the outlet box, Fig 8.  Tighten them evenly. 

WARNING -  To Reduce The Risk Of Fire, Electric Shock, Or Personal 

Injury Mount Fan To An Outlet Box Marked "Acceptable For Fan 

Support" And Use The Mounting Screws Provided With The Outlet Box.

2.

Page 3

 Remove one canopy screw (also Fig 8) and loosen the other.  Make 

sure all of the wires are accessible and are not being pinched.  Also, 

make sure the bracket doesn't wobble.

Fig. 8

II.  Preliminary Assembly.

     cont.

III.  Hanging the fan motor

Holding the fan carefully, lift it up to hanging bracket.  Place the ball into 

cradle of the bracket.  Turn the entire motor assembly until it locks into place.  

The tab on the bracket must be in the groove in the ball.  Make sure the wires 

are not being pinched.

If you have a Gulf Coast Remote Control, fan should be wired according to method A.
Method B can be used with two separate controls for the fan and light, or with a combination wall control, 

such as a 423L Gulf Coast control. 

Now tuck the wires and wirenuts carefully into outlet box.  Make sure the Green and White wires are tucked 

into one side of the box and the Black and Blue wires are tucked into the other side of the box.  Make sure 

wirenuts remain tightly on connections.

Fig. 9

There are three common wiring methods; choose the one best suited to your needs.  Keep in mind, the 

supply wire colors may vary.  (The wire colors in parentheses are commonly found in existing structures.)   

Use the large orange wirenuts to make the connections.  It is a good idea to wire the blue light kit wire 

now, even if you don't have a light kit.  It may save you some trouble in the future.

IV. Wiring methods and instructions.

A. Pull chain operation only.

 1. Green ground wires to outlet box ground (bare)
 2. Black and blue wires from fan to hot supply (black)
 3. White wire from fan to neutral supply (white)
    See Fig 10.

B.  

 Wall control for both fan and light kit (Read the 

instructions for the wall control first.)
 1. Green ground wires to outlet box ground. (bare)
 2. Black wire from fan to (black) wire from fan control.
 3. Blue wire from fan to (red) wire from light control.
 4. White wire from fan to neutral supply. (white)
    See Fig 11.

C. Pull chain operation of fan - Wall control for the light.

 1. Green ground wires to outlet box ground. (bare)
 2. Black wire from fan to hot supply. (black)
 3. Blue wire from fan to (red) wire from wall control.
 4. White wire from fan to neutral supply. (white)
    See Fig 12.

FIG. 10

BLUE

FAN

BLK

WHT

SUPPLY HOT

SUPPLY NEUTRAL

FIG. 11

BLUE

FAN

BLK

WHT

FROM FAN CONTROL

FROM LIGHT CONTROL

SUPPLY NEUTRAL

SUPPLY HOT

FAN

LIGHT

GULF COAST

FIG. 12

BLUE

FAN

BLK

WHT

FROM SUPPLY HOT

FROM LIGHT CONTROL

SUPPLY NEUTRAL

SUPPLY HOT

ON 

ON 

Gulf Coast Fans 2010 - Portions 

â

 1993

Содержание Futura HC-1992-DA

Страница 1: ...COAST CONTROLS WARNING TO REDUCE THE RISK OF PERSONAL INJURY DO NOT BEND THE BLADE IRONS WHEN INSTALLING ON BLADES BALANCING THE BLADES OR CLEANING THE FAN DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING FAN BLADES WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PERSONAL INJURY MOUNT FAN TO AN OUTLET BOX MARKED ACCEPTABLE FOR FAN SUPPORT AND USE THE MOUNTING SCREWS PROVIDED WITH THE OUTLET ...

Страница 2: ...peat this procedure with the rest of the blades You will have at least one screw left over this is a spare Be sure all of the screws are tight Fig 7 B Fig 7 Gulf Coast Fans 2010 Portions â 1993 Remove and discard the three to five black shipping blocks from the face of the motor See Fig 1 B Remove the three screws from the switch cup plate on motor assembly See Fig 1 C Place the motor switch cup p...

Страница 3: ... wirenuts remain tightly on connections Fig 9 There are three common wiring methods choose the one best suited to your needs Keep in mind the supply wire colors may vary The wire colors in parentheses are commonly found in existing structures Use the large orange wirenuts to make the connections It is a good idea to wire the blue light kit wire now even if you don t have a light kit It may save yo...

Страница 4: ... satisfy our customer Gulf Coast Fans Inc 300 Dunbar Avenue Oldsmar Florida 34677 813 855 7384 VI To avoid scratching the switch cup or damaging the motor do not run the fan without the blades So the next step is to mount the blade assemblies on the motor The easiest way to do this is to insert a motor screw into one hole on the base of the blade iron hold it in place with a screwdriver and lift b...

Отзывы: