GuitarPCB Fuzzstortion, Руководство пользователя

Страница: 1 / 3

Fuzzstortion
With 80+ unique circuits under our belt we are getting picky about what we release.
This time it is the Fuzzstortion, not because it is less filling but because it sounds great!
This Guitar Volume sensitive circuit achieves tube amp style breakup to Fuzzy Saturation.
In between you’ll find an array of useful overdrive and distortion tones to play with.
The Fuzzstortion will also handle bass frequencies extremely well.
No need for a tone control as it delivers the full frequency provided by your rig.
​
See Demo
Part Value Part Value Part Value
R1 10k C1 22n Q1 PF5102
R2 10k C2 1n Q2 MPSA13
R3 22k C3 100u D1 1N4001
R4 200R C4 68n D2 LED-CA-BiColor
R5 1k8 C5 100n VOL A100k
R6 100R C6 100u GAIN B250K
Build Notes:
​
You may use 9mm potentiometers as an on-board pot if you wish. Simply solder them to
the back side of the board and align the lug number with the silkscreen on the board.
Use Sockets for the transistors so you may try different ones and prevent overheating the transistor.
This board comes with dual power and ground pads which are convenient for combo builds.