Guitammer BK4-4, Руководство пользователя

Страница: 5 / 12

02
Quick Setup
This section is for those who are more experienced with sound
system installation. The ButtKicker
® Advance is a passive, 4 Ohm
speaker load, which requires power from an audio power amplifier
which in turn requires an adequate signal feed from your sound
system (Figure 1). Shaking forces are produced in the direction
of the axis of the shaker as shown (Figure 2). A positive voltage
at the red terminal wire will produce a “push” by the ButtKicker
®
Advance toward its feet (red terminal is positive). It can be mounted
on the topside of a surface; inverted and mounted to the bottom
side of a surface or, using the side mounting plate, mounted to
the side of an object as long as the unit is facing up or down.
It may also help you to consider the ButtKicker
®
Advance as a
“silent subwoofer” that enables you to “feel” the low end (bass)
by vibrating the surface to which it is attached as opposed to
moving air like a subwoofer. And, like a subwoofer, the ButtKicker
®
Advance also requires a separate amplifier to power it. While
powered subwoofer’s have their amplifiers in the speaker cabinet,
the ButtKicker
®
Advance’s amplifier is a separate component.
•
Receiver
•
Processor
•
PreAmp
ButtKicker Power
Amplifier BKA300-4
Figure 1. System Integration
Figure 2. Piston Direction
ButtKicker
®
Advance