User Guide
Attention !
(1) Please install the smartphone before powering on the gimbal!
(2) When not in use, turn off the gimbal and then remove the smartphone.
!
1
1
Prior to use, please be sure to fill the battery.
Attach the smartphone with the
quick-release adapter,and ensure
it is secure.
Tips: Please take off the protective casing
of the smartphone before installation.
Installing the phone
Power on：
Short press
Bluetooth shutter/Power
0.5s
until the
green light up, then release it to turn on the gimbal.
Power off：
Long press
Bluetooth shutter/Power
at the same time 5s
until the red light constant on, then release it to turn off the gimbal.
Attention: Turn the gimbal on after the phone has
been secured properly.
In case of low battery, the indicator will
flash red 3 times every 5 seconds. Please
charge Vimbles or replace the battery.
!
2
Power on / off
Bluetooth shutter
/Power
