Guilin
Feiyu
Technology
Incorporated
Company
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com [email protected]
- 6 -
③ PleasecheckwhetherchoosetherightUSBport:cu.SLAB_USBtoUART
andbaudrateas115200.
④ Pleasecheckwhetherpressthefunctionbuttonafterclickingon“OPEN
COM“ button.
Ifyoudidallthethingsright,pleasereplaceanewUSBcableandtryagain.
NO.2
When”Gimbal Connected” and the version of current firmware
showingup,clickon “Start”,butnoluck, ”SENDFAIL” justshowupto
remindmetheupdatedon’twork.
A:
Ithappenedbecauseyoudidn’tholdthefunctionbuttonforenough
time, and the power didn’t start well. When the power is ready , the
indicatoralternatelyflashespink.Ifnot,pleasekeepholdingthefunction
buttonuntiltheindicatorturnsgreenagain.
NO.3
Afterclickingon “ START”,updatingprocessbarshowupinthe
interface,but ”SENDFAIL” happenduringtheupdate.
A:
If ”SENDFAIL” showsupduringtheupdate,theremaybesomething
wrongwiththeconnectionbetweencontrolboards.
Please try to start update again, if the same issue happen, please kindly
sendbacktousforrepair.
–––– END ––––
Note:Wereservetherighttochangethismanualatanytime!Andthe
latesteditionwillbeshownonourofficialwebsitewww.feiyu-tech.com.
