Customer Helpline 0333 3201989
9
Operating Instructions
3. HAND GRIP AREA (SEE FIG D)
Always hold your saw firmly with both hands when operating the tool.
4. INSERTING AND REMOVING A BLADE (SEE FIG E1, E2)
WARNING: Never touch blade immediately after use as it may be extremely
hot. WARNING: To prevent personal injury, ALWAYS disconnect the plug from
power source BEFORE assembling parts, making adjustments or changing blades.
Wear protective gloves.
INSERTING A BLADE
NOTE: Before inserting a blade, you need to look through the hole (a) and check if the
securing pin (b) is in the correct position as in Fig E1. If its position is not correct, use a
screwdriver to change the securing pin into the correct position.
1) Place the blade onto the securing pin, making sure that the blade hole is engaged into
the securing pin (b).
2) Rotate the blade upward 90
o
until it is locked in the blade holder (8), then release the
blade release button.
3) Ensure that the blade is securely fitted by pulling it out.
REMOVING A BLADE
1) Keep the blade release button depressed and rotate the blade downward 90
o
.
2) Take the blade hole off the securing pin and slide it out of the blade holder.
3) Release the blade release button.
4
5
1
MIN
Speed
Material
8
b
a
A
B
C
D
E1
E2
F
G
H
I
4
5
1
MIN
Speed
Material
8
b
a
A
B
C
D
E1
E2
F
G
H
I
