Customer Helpline
0333 3201989
10
Operating Instructions
4� ALLEN KEY STORAGE
The allen key (5) is placed at the power cable sheath (SEE FIG D).
5� BLADE FITTING (SEE FIG E)
NOTE:
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
To fit blade firstly use the allen key provided to loosen the blade set screws on the blade
holder. The blade’s cutting edge should be facing forward. Insert the blade’s mounting
portion into the groove in the blade holder until it touches the bottom of the holder. Then
firmly tighten the set screw as shown in FIG E.
NOTE:
To fit the blade firmly, do not insert the blade over the line.(SEE FIG G)
WARNING: blade teeth are very sharp�
For best cutting results ensure you use a
blade suited to the material and cut quality you need.
6� ROLLER GUIDE(SEE FIG F)
Ensure the blade is located and runs smoothly in the groove (SEE FIG F) otherwise the
pendulum function will not work correctly and the blade will not be supported during
cutting.
5
D
E
F
G
