13
Customer Helpline
0333 3201989
Operating Instructions
overcutting required.
1) Determine the desired depth according to the thickness of the material plus a blade
allowance of 3 mm.
2) Unlock the depth of cut adjustment and lock lever . (SEE FIG. D1)
3) Slide the depth of cut indicator to the desired depth of cut. Push the depth of cut
adjustment and lock lever down . (SEE FIG. D2)
When you do plunge or pocket cutting into the middle (or interior) of the work piece,
through the narrow slot, you can see the cutting mark you drew and the location where the
blade will plunge into the work piece, based on the selected blade depth. (See Fig. D3)
Always practice in a scrap work piece to become familiar with this cutting operation. The
selected depth of cut is now set. When the saw’s blade is manually lowered, the blade will
be below the base at the selected depth.
6� PARALLEL GUIDE (SEE FIG� E1, E2)
The parallel guide is used for making parallel cuts on workpiece edge at a chosen distance.
The distance is from the straight edge fitting the parallel guide closely to the center of the
“V” (blade alignment indicator)(E2).
It can be used on either side of the base plate (9).
E1
E2
F1
F2
