Guild PSC185GH Скачать руководство пользователя страница 6

Customer Helpline

 0333 3201989

6

a) 

DANGER: Keep hands away from cutting area and the blade� Keep your 
second hand on auxiliary handle, or motor housing�

 If both hands are holding 

the saw, they cannot be cut by the blade.

b)  Do not reach underneath the workpiece� 

The guard cannot protect you from the blade 

below the workpiece.

c)  Adjust the cutting depth to the thickness of the workpiece� 

Less than a full tooth of 

the blade teeth should be visible below the workpiece.

d)  Never hold piece being cut in your hands or across your leg� Secure the workpiece 

to a stable platform�

 It is important to support the work properly to minimize body 

exposure, blade binding, or loss of control.

e)  Hold the power tool by insulated gripping surfaces only, when performing an 

operation where the cutting tool may contact hidden wiring or its own cord� 

Contact 

with a “live” wire will also make exposed metal parts of the power tool “live” and could 
give the operator an electric shock.

f)  When ripping always use a rip fence or straight edge guide� 

This improves the 

accuracy of cut and reduces the chance of blade binding.

g)  Always use blades with correct size and shape (diamond versus round) of 

arbour holes� 

Blades that do not match the mounting hardware of the saw will run 

eccentrically, causing loss of control.

h)  Never use damaged or incorrect blade washers or bolt� 

The blade washers and 

bolt were specially designed for your saw, for optimum performance and safety of 
operation.

Kickback causes and related warnings

-  Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing 

an uncontrolled saw to lift up and out of the workpiece toward the operator;

-  When the blade is pinched or bound tightly by the kerf closing down, the blade stalls 

and the motor reaction drives the unit rapidly back toward the operator;

-  If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the 

blade can dig into the top surface of the wood causing the blade to climb out of the kerf 
and jump back toward the operator.

Kickback is the result of saw misuse and/or incorrect operating procedures or conditions 
and can be avoided by taking proper precautions as given below.

a)  Maintain a firm grip with both hands on the saw and position your arms to resist 

kickback forces� Position your body to either side of the blade, but not in line with 
the blade� 

Kickback could cause the saw to jump backwards, but kickback forces can 

be controlled by the operator, if proper precautions are taken.

b)  When blade is binding, or when interrupting a cut for any reason, release the trigger 

and hold the saw motionless in the material until the blade comes to a complete 
stop� Never attempt to remove the saw from the work or pull the saw backward 
while the blade is in motion or kickback may occur� 

Investigate and take corrective 

actions to eliminate the cause of blade binding.

Safety Information 

Important

 - Please read these instructions fully before starting assembly

Safety Warnings for all saws

Further safety instructions for all saws

Содержание PSC185GH





















Отзывы: