Guild PSC160GL, Инструкция по эксплуатации

Страница: 11 / 16

Customer Helpline 0333 3201989
11
E F
Operating Instructions
5. HAND GRIP POSITION (SEE FIG E)
Always hold your saw firmly with both hands when operating.
6. SAFETY ON/OFF SWITCH (SEE FIG F)
Your switch is locked off to prevent accidental starting. Depress the lock off button then
the on/off switch and release the lock off button. Your switch is now on. To switch off, just
release the on/off switch. The blade may continue to rotate after switching off. Wait until
the tool comes to a complete stop before setting down.
7. PARALLEL GUIDE ADJUSTMENT (SEE FIG G)
It is used for making cuts parallel to a workpiece edge at a chosen distance. Slide the
parallel guide arm through the fixture to achieve the required cutting distance then tighten
the lock knob to clamp. It can be used from both sides of the base plate. For straight cuts,
use the 0° guide mark to align with your parallel guide scale. For a 45° bevel cut, use the
45° guide mark to align with your parallel guide scale. Securely clamp the parallel guide.
NOTE: It is best to carry out a trial cut.
8. CUTTING OPERATION
Set the required base plate angle and cutting depth. Place front of the base plate on the
workpiece (do not allow the blade to touch the workpiece at this time).
Start the saw. When the saw reaches the maximum speed, push it forward slowly. Always
hold your saw firmly with both hands when operating.
G