Guild PMF250G, Инструкция по эксплуатации

Страница: 8 / 16

Customer Helpline
0333 3201989
8
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
The power tool is intended for sawing and remodeling wooden materials, plastic, plaster,
non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft
wall tiles and for dry grinding of small surfaces. It is especially suitable for working close to
edges and for flush cutting.
WARNING: Before working your tool make sure that no power cords will be
damaged� Before mounting or replacing application tools or accessories, pull
the power plug� This preventative safety measure eliminates danger from accidentally
starting the power tool�
Do not touch the gear box after long working time, because it could be hot.
1� MOUNTING ACCESSORIES
CAUTION:
For all work or when changing application tools, always wear protective
gloves. Avoid danger of injury from the sharp edges of the application tools.
Application tools can become very hot while working, presenting danger of burns!
WARNING: To reduce the risk of injury, do not let the Universal end cut blades or
any segment saw blades face back toward the user’s hand�
-Loosen the fastening piece
Use the Allen Key to rotate the fastening piece clockwise. (SEE FIG A)
-Insert Accessories
For the accessories with tool and most other branded accessories,
the fastening piece must be completely removed to install accessory (SEE FIG B).
Operating Instructions
A B