Customer Helpline 0333 3201989
10
OPERATION
1.FITTING AND REMOVING BITS (SEE FIG B)
Insert the bit into the bit holder and push the bit into the chuck as far as possible. To
remove the bit, simply pull it out of the bit holder.
2. FORWARD/REVERSE SWITCH (SEE FIG C1 C2)
For screw driving use forward rotation marked “
” (lever is moved to the left). Only
use reverse rotation marked “
” (lever is moved to the right) to remove screws or
release a jammed drill bit.
WARNING: Never change the direction of rotation when the chuck is rotating.
Wait until it has stopped.
3. SWITCH LOCK (SEE FIG D)
The On/Off switch trigger can be locked in OFF position. This helps to reduce the
possibility of accidental starting when not in use. To lock the switch, place the forward
and reverse rotation selector in the center position.
Operating Instructions
Bit
B
C1
C2
D
