Customer Helpline
8
Operating Instructions
The appliance is intended for inflating car and bicycle tyres and inflatable items for games, sport and
leisure, but not for pumping up inflatable items with a larger volume, such as inflatable boats and very
large air beds.
The appliance is not intended for professional use.
Note:
Charge at room temperature. The ambient temperature must be between 0°C and 45°C.
Note:
Do not charge if the charger's cord or plug is damaged. Charging with a damaged cord may
result in fire or electrical shock. If the charge is damaged in any way, have it repaired by a qualified
seviceman.
Note:
Do not short circuit the terminal of the battery. Take care that metal such as paper clips, nail,
the sides of matal tools boxes, etc, which cause a short circuit in your battery. Extremely high
temperatures and fire can result.
Note:
Improperly attached hoses or accessories can become detached under pressure and cause
serious injury.Possible air leaks can cause faulty pressure readings. Make sure all connections are
tightly secured.
Charge the battery with the charger
Connect the charger to the household power socket.
Connect the outlet socket of the charger to the battery
charging port
A
. The battery will start to charge.
The battery indicator lights( 3 blue LEDs) at the rear
of the battery pack will twinkle while the battery is
being charged. They will gradually (from left to right)
be lighted.
The three blue LED lights will be lit stably, when the
battery is fully charged.
A
4
4
4
9
11
A
0345 640 0800
Battery Capacity Status
30%
70%
100%
9
11
Install and remove battery pack
To install: Align the ribs on the battery pack with the
grooves in the battery ports. Slide the battery pack
in the tools base until in locks (click) in place.
Make sure the latch on the battery pack snaps into
place and that the battery pack is secured in the tool
before operating.
To remove: Pushing the battery pack release button
at the front of the battery pack to release the battery
pack and remove it from the tool.
9
