GUIDANCE MARINE RadaScan View, Руководство по установке

Страница: 52 / 69

Mounting Responders
Loosen the nut to swivel the
bracket in the required direction.
!
Tighten the nut with a
spanner to fix the bracket’s
position.
52
The responder can be used with or without a swivel bracket, as
long as it is mounted with its longest side vertical, and its carrying-
handle at the top.
To Mount the Responder:
1. Hook the foot of the responder underneath the knob on the
bottom of the mounting plate. (See below).
2. Rotate the responder backwards until it is held in place by its
magnet against the mounting plate.
Knob
Mounting
Plate
Magnet
Swivel Bracket
The swivel bracket (Part No. 21-0328-1) should be used to point
the responder towards the RadaScan vessel’s working area.
It can be mounted on either a horizontal or vertical bar:
Swivel Bracket
Mounting on Horizontal Bar Mounting on Vertical Bar
Swivel Bracket