GUIDANCE MARINE CyScan AS Скачать руководство пользователя страница 54

Страница: 54 / 62

Using the On Screen Keyboard

In order to accommodate systems without keyboards, CyScan Dashboard provides an
onscreen Keyboard (OSK) option. This enables text to be input using only a mouse pointer
or touch screen.

To enable the on-screen keyboard

If, during installation, you indicated that the Dashboard would be used with a touch screen,
the OSK will already be enabled.
Otherwise, click

F11

or the

Enable On Screen Keyboard

button in the Dashboard

Hotkeys menu.

To use the on-screen keyboard

Simply click on any text entry field and the OSK will pop-up ready for use:

Click on the necessary keys on the on-screen keyboard using your mouse or by tapping
the touch screen.

When you have finished using the OSK, proceed to the next relevant action (e.g. clicking
on the

Apply

button), or else click on a different part of the screen, and the OSK will

disappear.

In the case of a numerical field, the OSK is restricted to the appropriate keys:

Содержание CyScan AS































































Результаты поиска

Содержание CyScan AS

Отзывы:

Похожие инструкции для CyScan AS

Бренды по названию

Популярные бренды

GUIDANCE MARINE CyScan AS, Руководство оператора

Результаты поиска

Содержание CyScan AS

Отзывы:

Похожие инструкции для CyScan AS

Бренды по названию

Популярные бренды