Your gateway unit
must have
a connection to the
Internet for the configuration process to be completed. If
you see a green YES then proceed to step 2. If a red NO
then click on the link to diagnose the problem.
You may have to set a ‘fixed IP’. If you are not familiar
with setting a fixed IP then ask a network technician to
provide help with this.
Some DSL and Cable routers have a firewall setting that
prevents the gateway from connecting to the Internet.
You may have to change a setting on the router firewall.
Step 2: configure hotspot settings
Select your time zone and set your password. Note your
password and keep in a safe place.
If you select unlimited access then your guests will click
on a disclaimer to access the Internet. If you select
controlled access then you will have to generate access
codes for your guests.
Step 1: test the Internet access
Step 4: select guest access
Hotspot Gateway Product Setup
- Quick Start Guide 2
Download the product manual at: http://www.guest-internet.com/gateway
Finished, click on reboot to start your hotspot
Your guests will see this information on the login page
After reboot wait two minutes then open your browser
to see your login page. If you want to make changes
then login again and click on the setup wizard.
Step 3: login page branding
Copyright © Fire4 Systems Inc., 2012. All rights reserved.
